ABT Aero package wide body (only for s-line) suitable only for following engine codes (CREC, CZZA, CZZB, CRTC)
Not suitable for vehicles with Diesel-hybrid or 2.0 TFSI engines only for vehicles WITH serial towing device due to optical reasons we do recommend to install our ABT spacer set for Q7
Consisting of:
· 4M008006110 ABT - front skirt
· 4M008006160 ABT - fender extensions
· 4M008006260 ABT - door strip attachments
· 4M008006130-1 ABT - rear skirt set incl. rear muffler and end pipes
ABT-fender inserts and ABT rear wing can be installed additionally.
Range of use:
- Audi Q7_4M00 (SUV, MY2015)
- vehicles with S-Line exterior package
- vehicles with S-Line selection configuration
- not for vehicles WITHOUT serial towing advice
- suitable only for following engine codes (CREC, CZZA, CZZB, CRTC)
Not suitable for:
Diesel vehicles with hybrid propulsion system (PR no. 0K3) 2,0l_R4_TFSI_185kW; MKB: CVJA, CYRB
Also suitable for:
- vehicles with standard configuration (see additional information)
- vehicles with S-Line sport package (see additional information)
- vehicles with ACC (adaptive cruise control)
- vehicles with night vision assistant (see additional information)
- vehicles with park assistant plus
- vehicles for use in countries with high temperatures (see additional information)
- vehicles with Audi side assist (see additional information)
- vehicles with Audi pre sense rear (see additional information)
- vehicles with park assistant (see additional information)
- vehicles with rear view camera - vehicles with draw bar
- vehicles with automatic trunk lid unlocking device / easy open (see additional information)
- vehicles with ABT - fender extension
- vehicles with wide serial wheel arches
Limitations:
not suitable for:
- vehicles without draw bar
- vehicles sold from the manufacturer to areas defined hot country version or super hot country version.
Additional information:
ABT- front skirt
- on vehicles with park assistant plus the sensor bracket set (art.-no.: 4M00 8006 215) has to be ordered at ABT Sportsline before starting the conversion. The serial sensors will be reused. In default factory configuration, the bore holes for the sensors are closed and have to be machined before painting according to the mounting instructions
- the covers for the headlamp cleaning device of the vehicle (with S-Line exterior) will be reused. to avoid colour differences on the converted vehicle, we recommend to paint the covers together with the front skirt.
- Depending on the equipment and configuration of the vehicle further technical configurations respectively assistant systems (for example ACC, night vision assistant, lane assist, side assist, etc.) have to be checked or adjusted.The valid regulations of the manufacturer have to be respected. The costs for potential additional work are not included in the assembly time of the ABT - front skirt and have to be invoiced separately depending on the effort
- Fitment of the ABT - front skirt on vehicles with standard configuration or S-Line sport package is only possible when certain Audi original parts are ordered before starting the conversion. The complete range of parts (small parts and mounting material) can vary depending on configuration and model year of the vehicle. Therefore it is necessary to check which additional parts are needed according to the vehicle identification number.
- For vehicles which will be driven in countries with high temperatures the lateral air intake mesh have to be machined according to the mounting instructions. For a flawless optic we recommend to paint the visible side of the air intake mesh after the modifications. The costs are neither included in the assembly time nor the painting costs of the ABT - front skirt and have to be invoiced separately.
ABT - rear skirt - on vehicles with park assistant the sensor bracket set (art.-no.: 4M00 8006 215) has to be ordered at ABT Sportsline before starting the conversion. The serial sensors will be reused. In default factory configuration, the bore holes for the sensors are closed and have to be machined before painting according to the mounting instructions - Depending on the equipment and configuration of the vehicle further technical configurations respectively assistant systems (for example lane assist, side assist, etc.) have to be checked or adjusted. The valid regulations of the manufacturer have to be respected. The costs for potential additional work are not included in the assembly time of the ABT - rear skirt respectively ABT - rear skirt set and have to be invoiced separately depending on the effort - for vehicles with standard configuration both covers of the towing hook device of the S-Line exterior package (art.-no. 4M0 807 441B/4M0 807 442B) have to be ordered and painted.
Additional information:
- the glue which is needed for the assembly is not included in the delivery. Please only use the adhesives mentioned in the test documents (general operating license, approval). Disregard leads to the loss of the general operating license and insurance protection of the vehicle as well as prosecution in case of damage. The approved adhesives can be bought at Volkswagen/ Audi with article number 000.071.785 D as a complete adhesive set (glue incl. primer). Seven adhesive sets are needed for the assembly.
Article number: 4M008006000