Mishimoto intercoolers significantly reduce intake air temperatures to make sure you’re getting the most power for your boost. They are constructed of 100% aluminum and feature cast end tanks to handle high boost pressures.Full description
A top-mount intercooler upgrade is a great way to equip your flat-four with a cool charge of air! A cool, dense charge of air can allow for more aggressive tuning and increased power. The Mishimoto Subaru WRX and STI TMIC Kit provides a unique option for upgrading your charge air system. This top-mount intercooler kit utilizes a single entry inlet compared to the stock Y-pipe setup.
This unique tank design provides maximum airflow and superior air dispersion through the core, a process which results in optimal AIT reduction. This top-mount intercooler uses a high-efficiency bar-and-plate core, which provides increased volume and improved heat transfer. The kit is completely bolt-on, requiring zero modifications to your vehicle. The Mishimoto top-mount intercooler kit includes silicone bypass hoses for both the WRX and STI, a silicone crankcase ventilation hose, a bypass valve gasket, a silicone throttle body hose, and all the T-bolt clamps and hardware necessary for installation.
This top-mount intercooler kit has endured rigorous testing on both stock and modified vehicles and has proven to increase power and reduce air intake temperatures. On our 305 hp test vehicle running 20–22 psi of boost, this intercooler provided a 14 hp increase and a 30°F drop in AITs compared to the stock STI TMIC– for more testing details, check out the engineering report! Thanks to a precision engineered and tested core construction, this intercooler will support vehicles with up to 350 hp. This top-mount intercooler kit is available with either a Stealth Black or Sleek Silver cooler.
Installation Torque Specs 27 in-lbs (3N*M) recommended for all t-bolt and constant tension t-bolt clamps. These clamps have an operating range of 18-35 in-lbs (2-4N*M). Do not exceed the maximum torque rating of 35 in-lbs (4N*M).
22 in-lbs (2.5N*M) recommended for all worm-gear clamps. These clamps have an operating range of 18-27 in-lbs 2-3N*M. Do not exceed the maximum torque rating of 27 in-lbs (3N*M).
Silicone Couplers (5) Silicone Hoses and Couplers
(1) Intercooler to throttle body coupler
Purchase Includes 1 – Bar-and-Plate Intercooler
5 – Silicone Hoses and Couplers
1 – High temp silicone nS hose
4 – T-Bolt Clamps
2 – 3 T-bolt Clamps
1 – 2.75 T-bolt Clamp
1 – 2.25 T-bolt Clamp
1 – Bypass Valve Gasket
1 – Black Nylon Hose Fitting, 3/4 I.D.
1 – Black Nylon Tee Hose Fitting, 3/4 I.D.
1 – WRX specific BPV hose
1 – STI specific BPV hose
1 – Intercooler to throttle body coupler
1 – PCV hose
Note This kit is rated for approximately 350 whp, or 25 psi of turbo boost. Exceeding these horsepower or pressure limits may require a larger front-mount intercooler. This intercooler kit will not fit RHD vehicles.
High Temp Hose Specs:
1.81 I.D. / 2.20 O.D. – On turbo outlet
2.20 I.D. / 2.60 O.D. – After turbo oulet
5 Hose thickness
Withstands up to 400°F (204°C) temps
Fits on turbos with 1.97 (50) maximum compressor outlet size
Reinforced with 7 internal steel rings for increased durability
Constant Tension T-Bolt Clamps Specs (2) 3" T-bolt Clamps
(1) 2.75" T-bolt Clamp
(1) 2.25" T-bolt Clamp
Core Thickness 89 mm
Hot-Side Intercooler Pipe Specs –1.81" I.D. / 2.20" O.D. – On turbo outlet
–2.20" I.D. / 2.60" O.D. – After turbo oulet
–5mm Hose thickness
–Withstands up to 400°F (204°C) temps
–Fits on turbos with 1.97" (50mm) maximum compressor outlet size
–Reinforced with 7 internal steel rings for increased durability
PCV Hose Specs 17.5" length
.45" I.D.
.75" O.D.
4mm thick
Intercooler/Throttle Body Coupler Specs 2.125" length
2.75" I.D.
3.00" O.D.
4mm thick
STI BPV Hose Specs 1.16" – 1.30" I.D.
1.56" – 1.70" O.D.
5mm hose thickness
WRX BPV Hose Specs 1.16" – 1.30" I.D.
1.56" – 1.70" O.D.
5mm hose thickness
Engine Codes EJ20
EJ25
Chassis Codes GD6
GG6
Fits 02–07 Subaru WRX
04–07 Subaru STI
05–06 Saab 9-2x Aero
Weight 17.25
Tank Wall Thickness 3.5
Fin Pitch Internal: 6.5 fin height, 2 fin pitch
External: 6.5 fin height, 1.7 fin pitch
Max Rec. PSI 20-22 psi
Outlet 70 mm
Core Length 483 mm
Core Height 152 mm
Core Width 89 mm
Inlet 63.5 mm
Core Size 483 mm x 152 mm x 89 mm
Overall Width 92 mm
Overall Height 286 mm
Overall Length 565 mm
Construction Bar-and-Plate
Max Rec. HP 305 whp
Make Subaru
We are fast
We have own warehouse with most of products in stock.