EN
CZ
- SUSPENSION
- AIR SUSPENSIONS
- FITTINGS AND CLUTCHES
Fittings and clutches
Říká se, že řetěz je vždy jen tak silný jako jeho nejslabší článek. Proto nepodceňujte při stavbě vzduchového podvozku zejména použití kvalitních a spolehlivých fitinek. V naší nabídce naleznete pouze špičkové fitinky od amerických výrobců Air Lift Performance nebo VIAIR. Díky těmto fitinkám také můžete snadno zachovat americký rozměr kompletního rozvodu a není tak třeba řešit redukce z evropských rozměrů pro zapojení ovládacích jednotek Autopilot V2 nebo Air Lift Performance 3P / 3H.
Naleznete u nás závitové redukce, redukční kolena, přechodky ze závitů na hadičky, pojistné ventily a mnoho dalšího. Naše nabídka se navíc neustále upravuje a rozšiřuje, takže pokud zde nemůžete najít fitinku, kterou potřebujete, neváhejte se na nás obrátit.
Naše společnost je přímým oficiálním dovozcem podvozkových komponentů Air Lift Performance a VIAIR i kompletních sad vzduchových podvozků Air Lift Performance ze Spojených států do ČR.
More
Filter
68 products
P/N: 92838
VIAIR push-to-connect fitting straight reducer, rozměr závit 1/8" (samice) / hadička 1/4"
NOTE: Use thread sealant for proper installation. Thread tape is not recommended.
P/N: 13866
VIAIR push-to-connect fitting straight reducer, rozměr závit 1/4" (samec) / hadička 3/8"
DOT Approved 1/4″ NPT Airline Straight Push-to-Connect fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI.
P/N: 11470
VIAIR push-to-connect fitting straight reducer, rozměr závit 1/4" (samec) / hadička 1/4"
DOT Approved 1/4″ NPT Airline Straight Push-to-Connect fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI.
P/N: 11490
VIAIR DOT PTC Style Inflation Valve, na hadičku 1/4"
DOT approved PTC Style Inflation Valve from VIAIR, made from Nickel-plated Brass.
P/N: 11446
VIAIR push-to-connect fitting 90 degree reducing elbow, rozměr závit 1/4" (samec) / hadička 1/4"
DOT Approved 1/4″ NPT 90° Swivel Elbow Push-to-Connect Fitting from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI.
P/N: 00053_00003
Metal plug with internal hex and collar, rozměr závit 1/4" (samec)
Lock plug with 1/4" thread size ideal for locking the air tank port etc.
P/N: 21247
Air Lift thread reduction from 1/2"(M) to 1/4"(F)
Air Lift Performance závitová redukce vnější závit 1/2" (samec) x vnitřní závit 1/4" (samice)
P/N: 21610
Air Lift thread reduction from 1/4"(M) to 1/8"(F)
Air Lift Performance závitová redukce 1/4" (samec) x 1/8" (samice)
P/N: 22653
Air Lift Performance 3/8" bulkhead
Air Lift Performance spojka s kontramatkami vstup 2x 3/8" hadička. Ideální například jako průchodka karoserií, která zabraňuje poškození hadičky v místě prostupu karoserií.
P/N: 92175
VIAIR safety valve, tlak pro otevření 12 bar (175 PSI)
NOTE: Use thread sealant for proper installation. Thread tape is not recommended.
P/N: 21738
Air Lift thread reduction from 3/8" (M) to 1/4" (F)
Air Lift Performance závitová redukce vnější závit 3/8" (samec) x vnitřní závit 1/4" (samice)
P/N: 92835
VIAIR Drain Cock 1/4"
NOTE: Use thread sealant for proper installation. Thread tape is not recommended.
P/N: 92205
VIAIR safety valve, tlak pro otevření 14 bar (205 PSI)
NOTE: Use thread sealant for proper installation. Thread tape is not recommended.
P/N: 11410
VIAIR push-to-connect fitting T-piece union, rozměr 3x hadička 1/4"
DOT Approved T-Union Push-to-Connect fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI. NOTE: Airline must have a straight cut at connection point.
P/N: 11402
VIAIR push-to-connect fitting straight union, rozměr 2x hadička 1/4"
DOT Approved Straight Union Push-to-Connect fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI. NOTE: Airline must have a straight cut at connection point.
P/N: 00053_00004
Metal plug with internal hex and collar, rozměr závit 3/8" (samec)
Lock plug with 3/8" thread size ideal for locking the air tank port etc.
P/N: 13802
VIAIR push-to-connect fitting straight union, rozměr 2x hadička 3/8"
DOT Approved Straight Union Push-to-Connect fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI. NOTE: Airline must have a straight cut at connection point.
P/N: 13842
VIAIR push-to-connect fitting 90 degree reducing elbow, rozměr závit 1/4" (samec) / hadička 3/8"
DOT Approved 1/4″ NPT 90° Swivel Elbow Push-to-Connect Fitting from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI.
P/N: 13862
VIAIR push-to-connect fitting straight reducer, rozměr závit 1/8" (samec) / hadička 3/8"
DOT Approved 1/8″ NPT Airline Straight Push-to-Connect fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI.
P/N: 13870
VIAIR push-to-connect fitting straight reducer, rozměr závit 3/8" (samec) / hadička 3/8"
DOT Approved 3/8″ NPT Airline Straight Push-to-Connect fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI.
P/N: 11474
VIAIR push-to-connect fitting straight reducer, rozměr závit 3/8" (samec) / hadička 1/4"
DOT Approved 3/8″ NPT Airline Straight Push-to-Connect fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI.
P/N: 13846
VIAIR push-to-connect fitting 90 degree reducing elbow, rozměr závit 3/8" (samec) / hadička 3/8"
DOT Approved 3/8″ NPT 90° Swivel Elbow Push-to-Connect Fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI.
P/N: 92813
VIAIR Quick Connect Coupler 1/4"
NOTE: Use thread sealant for proper installation. Thread tape is not recommended.
P/N: 11466
VIAIR push-to-connect fitting straight reducer, rozměr závit 1/8" (samec) / hadička 1/4"
DOT Approved 1/8″ NPT Airline Straight Push-to-Connect fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI.
P/N: 21735
Air Lift thread reduction from 3/8"(M) to 1/8"(F)
Air Lift Performance závitová redukce 3/8" (samec) x 1/8" (samice)
P/N: 92842
VIAIR thread reducer, rozměr závit 1/4" (samec) / 3/8" (samice)
Závitová redukce VIAIR pro změnu závitu z 1/4" na 3/8".
P/N: 13834
VIAIR 90° Elbow Union Push-to-Connect Fitting
DOT Approved 90° Elbow Union Push-to-Connect fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI. NOTE: Airline must have a straight cut at connection point.
P/N: 13878
VIAIR push-to-connect fitting straight reducer, rozměr závit 1/4" (samice) / hadička 3/8"
DOT Approved 1/4″ NPT Airline Straight Push-to-Connect fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI.
P/N: 11482
VIAIR push-to-connect fitting straight reducer, rozměr závit 1/4" (samice) / hadička 1/4"
DOT Approved 1/4″ NPT Airline Straight Push-to-Connect fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI.
P/N: 11438
VIAIR 90° Elbow Union Push-to-Connect Fitting
DOT Approved 90° Elbow Union Push-to-Connect fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI. NOTE: Airline must have a straight cut at connection point.
P/N: 11430
VIAIR push-to-connect fitting T-fitting, rozměr závit 1/4" (samice) / 2x hadička 1/4"
DOT Approved Push-to-Connect 1/4″ NPT Swivel T-Fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI.
P/N: 13806
VIAIR push-to-connect fitting T-piece union, rozměr 3x hadička 3/8"
DOT Approved T-Union Push-to-Connect fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI. NOTE: Airline must have a straight cut at connection point.
P/N: 22652
Air Lift Performance 1/4" bulkhead
Air Lift Performance spojka s kontramatkami vstup 2x 1/4" hadička. Ideální například jako průchodka karoserií, která zabraňuje poškození hadičky v místě prostupu karoserií.
P/N: 13882
VIAIR push-to-connect fitting straight reducer, rozměr závit 3/8" (samice) / hadička 3/8"
DOT Approved 3/8″ NPT Airline Straight Push-to-Connect fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI.
P/N: 21732
Air Lift thread reduction from 1/2"(M) to 3/8"(F)
Air Lift Performance závitová redukce s vnějším závitem 1/2" (samec) a vnitřním závitem 3/8" (samice)
P/N: 13838
VIAIR push-to-connect fitting 90 degree reducing elbow, rozměr závit 1/8" (samec) / hadička 3/8"
DOT Approved 1/8″ NPT 90° Swivel Elbow Push-to-Connect Fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI.
Sale
P/N: 21846
Air Lift Performance reduction elbow / coupling 90 degrees from 3/8 "male to 1/4" hose
Air Lift Performance redukční koleno/spojka 90 stupňů ze závitu 3/8" samec na 1/4" hadičku
P/N: 92815
VIAIR Quick Connect Stud 1/4"
NOTE: Use thread sealant for proper installation. Thread tape is not recommended.
P/N: 11486
VIAIR push-to-connect fitting straight reducer, rozměr závit 3/8" (samice) / hadička 1/4"
DOT Approved 3/8″ NPT Airline Straight Push-to-Connect fittings from VIAIR connects airlines quickly and effortlessly, made from Nickel-plated Brass with a working pressure 0 – 200 PSI.
28 more....
Our company Escape6 is on the market since year 2000. Our open and positive approach to vehicle modifications, besides many years of experience, stems from the enthusiasm of our entire team. Each of us is a true car enthusiast, and so we can identify with your idea of car modifications, whether it's a Show&Shine competitor, circuit racer, or offroad driver. We actively visit automobile exhibitions around the world, as well as domestic tuning exhibitions, events and events where you can meet our own modified cars.
We are looking forward to seeing you in our showroom in Prague Čestlice, which is filled with the best of today's world tuning parts and accessories. Whether you are only looking for small accessories or car care products, or if you want your car to be completely "tuned out", you are in the right place with us! And do not forget to follow us on social networks where you can learn something behind the scenes of our company.
We are fast
We have own warehouse with most of products in stock.
(c) 2019 Escape6 s.r.o., Cestlice 272, 251 01 Cestlice
Tuning shop, shop and showroom in Prague
Phone: +420 222 519 645 | e-mail: info@escape6.cz
